Installation and
Operation
This sections details the installation and operation of the DVI-RGB 200, including:
•
•
•
•
•
Installation Overview
Follow these steps to install and set up an Extron DVI-RGB 200 for operation:
1
2
3
4
5
Mounting the Interface
CAUTION:
Detailed mounting instructions can be found in the
The 1U high, half-rack width interface DVI-RGB 200 can be placed on a tabletop,
mounted on a rack
optional hardware:
•
•
•
•
•
•
Installation Overview
Mounting the Interface
Rear Panel Connections and Control
Front Panel Controls and Indicator
Operation
Turn off all of the equipment. Ensure that the video sources and the output display are
all turned off and disconnected from the power source.
Mounting the
Mount the interface. See
Rear Panel Connections and
Connect the cables. See
Plug in the power supply, then turn on the display devices and the input devices.
Set the level and peaking. See
Installation and service must be performed by authorized personnel only.
shelf, or
mounted under a desk or
RSU 126 6-inch deep universal rack shelf kit (part #60-190-10)
RSB 126 6-inch deep basic rack shelf (part #60-604-11)
RSU 129 9.5-inch deep universal rack shelf kit (part #60-190-01)
RSB 129 9.5-inch deep basic rack shelf (part #60-604-02)
MBU 125 Under-desk mount kit (part #70-077-01)
MBD 129 Through-desk mount kit (part #70-077-02)
Interface.
Controls.
Front Panel Controls and
Reference Information
tabletop. Use the applicable
DVI-RGB 200 • Installation and Operation
Indicator.
section.
2