Table of Contents
Advertisement
im Vertrieb von
Introduction
About this Manual
This manual contains information about installing and
operating the Extron CIA111, CIA114, and CIA114F5 interfaces.
About the CIA111, CIA114, and CIA114F5
The Extron CIA111, CIA114, and CIA114F5 are wall- or floor
box-mountable computer video interfaces. The CIA111 mounts
to a wall or podium using a two-gang junction box and has
mounting spaces for up to four single-space Mini Architectural
Adapter Plates (MAAPs). The CIA114 mounts in a one-gang
junction box and the CIA114F5 is designed to fit the Steel City
665 floor box.
All three models feature image shift and monitor emulation
adjustments from the front panel. Sharpness and output sync
can be adjusted using rear panel controls. Each interface accepts
one computer video input (15-pin HD), one unbalanced stereo
audio input, and a 15-pin HD buffered local monitor output.
The interfaces can output audio as either balanced or
unbalanced signals.
Features
Image shifting control — Shifts the displayed image to the left
or right when you press a front panel rocker button.
Sharpness control — Provides image enhancement for high-
resolution signals by increasing clarity and image detail,
and compensates for signal loss during long cable runs.
One-button monitor emulation — Allows you to use the
interface without a monitor.
Audio buffering — The interfaces accept unbalanced stereo
computer audio and can output a balanced or unbalanced
signal.
Auto power — The interfaces turn on automatically when they
sense that an input cable is connected.
www.camboard.de
1-2
CIA111 and CIA114 • Introduction
CAMBOARD Electronics
CIA111 and CIA114 Computer Video Interface
®
Tel. 07131 911201
Fax 07131 911203
2
Chapter Two
Installation and Operation
Front Panel Features and Cabling
Rear Panel Features and Cabling
Pre-Installation Testing and Troubleshooting
Mounting the Interfaces
ce-info@camboard.de
Installation Overview
UL Requirements
Advertisement
Table of Contents
