Front Panel
Features and
Operation
This section contains a description of the IPL T PC1 and IPL T PC1i front panel features and
instructions for setting up the PC1 using the front panel. The following topics are discussed:
•
•
•
Front Panel Features
8
Figure 8.
a
b
c
d
e
f
Front Panel Features
Setting Up the System Using the Front Panel
Resetting
1
2
IPL T PC1
POWER
R
TX
RX
7
6
IPL T PC1 and IPL T PC1i Front Panel
Power button — Press this button to switch power on and off to the output receptacle
on the rear panel.
Tx and Rx LEDs — The Tx (transmit) LED lights when RS-232 data is being transmitted.
The Rx LED lights when RS-232 data is being received.
Input LED — This green LED lights when the Input contact closure port is activated
(shorted).
LAN status LEDs — These three LEDs show the status of the Ethernet connection as
follows:
100 — When lit, indicates a 100 Mbs connection speed. Otherwise, the connection
•
speed is 10 Mbs.
Link — Lights steadily while the interface has an active network connection.
•
Act (Activity) — Blinks while data is being sent or received.
•
IR LED — This green LED lights when IR data is being transmitted.
Receptacle power LED — This red LED lights while power is being supplied to the rear
panel receptacle and, therefore, to the attached output device.
3
100
4
INPUT
LINK
IR
ACT
5
IPL T PC1 • Front Panel Features and Operation
10