Extron electronics IPL T PC1 Setup Manual

Setup Guide Checklist
Chapter 1: Install Global Configurator.
c
• Install from the Software Products CD-ROM, or
• Download from Extron Web site.
Chapter 2: Make the IPL T PC1 cable connections.
c
1. c Power
2. Local Area Network (LAN)
c
3. Serial device
c
4. IR-controlled device
c
5. Switch or sensor (to contact closure Input port)
c
c Chapter 3: Create a Global Configurator project file, add a
device, and configure it. Build and upload the GC project
file. Launch the GlobalViewer
1. Download device drivers.
c
2. Create a new Global Configurator project file.
c
3. Add a device.
c
Define the location of the new device.
4. c
5. Save the new Global Configurator file.
c
6. Enter contacts.
c
7. Create e-mail messages.
c
8. Enter output receptacle and contact input port
c
labels.
9. Assign device drivers.
c
10. Set scheduled actions and e-mail deliveries.
c
Set monitored conditions.
11. c
12. Build the Global Configurator file.
c
13. Upload the Global Configurator file.
c
14. Change device settings (if desired).
c
15. Launch the GlobalViewer
c
Extron Electronics, USA Extron Electronics, Europe
1230 South Lewis Street Beeldschermweg 6C
Anaheim, CA 92805 3821 AH Amersfoort, The Netherlands
800.633.9876 714.491.1500 +800.3987.6673 +31.33.453.4040
FAX 714.491.1517 FAX +31.33.453.4050
www.extron.com
© 2007 Extron Electronics. All rights reserved.
interface.
®
® interface.
Extron Electronics, Asia Extron Electronics, Japan
135 Joo Seng Rd. #04-01 Kyodo Building, 16 Ichibancho
PM Industrial Bldg., Singapore 368363 Chiyoda-ku, Tokyo 102-0082
+800.7339.8766 +65.6383.4400 Japan
FAX +65.6383.4664 +81.3.3511.7655 FAX +81.3.3511.7656
Setup Guide
IP Link Power Control Interface
IPL T PC1 and IPL T PC1i
68-1386-01 A
06 07