Upgrading Firmware - Extron electronics IPL T PC1 User Manual

Upgrading Firmware

The Firmware Upgrade page lets you browse to locate and upload a new version of firmware
for your unit. The uploaded file must have the file extension
NOTE:
To find out the version of firmware that is currently loaded on your PC1, see "Firmware:" in
the System Description section of the
Downloading the firmware from the web
To obtain the firmware file to load to your PC1:
1. Visit the Extron website (www.extron.com).
2.
Click the
3.
On the Download Center page, click the
menu.
4.
On the Archives line at the top of the Firmware page, click the letter
5. On the next page that appears, click the
or IPL T PC1i line.
6.
Fill in the required information on the next Download Center page, and click the
Download IPLTPC1
7.
Click
Run
8. Follow the instructions on the installation wizard screens. The new firmware file is
placed on your computer internal disk.
Updating the firmware
To upload a new version of firmware:
1.
On the sidebar menu of the Configuration page, click
Upgrade page is displayed, showing the version of firmware that is currently loaded.
Figure 24.
The PC1 uses the same firmware as the IPL T PC1. However, it does not accept
other firmware files, such as the
System Status
tab.
Download
button.
on the
File Download
Firmware Upgrade Page
.S19
files for the IP Link S Series.
.s19
page.
Firmware link at the top of the left sidebar
link at the right end of the IPL T PC1
Download
window.
Firmware Upgrade
IPL T PC1 • HTML Configuration and Control
.
I .
. The Firmware
32