The System Status page displays information in the following categories:
•
System Description: Includes product model, port and receptacle description, part
number, firmware version, and the current date and time.
IP Settings: Displays the unit name, DHCP status, IP address, gateway address, subnet
•
mask, and the MAC address.
Port, AC, and Executive Mode Settings: Shows settings for the RS-232 and Contact
•
Input ports, name and On or Off status for the AC receptacle, and whether lock mode
(executive mode) is on or off.
Current Schedule: Shows the schedule currently in place for powering the output
•
device on and off, and for enabling and disabling executive mode.
Using the Configuration Pages
To access the Configuration pages, select the
pages that can be accessed from the Configuration page. They are listed in the sidebar
menu at the left of the page. These pages are described in the following sections.
Specifying system settings
On the System Settings page, you can set the date and time, change the IP address
information for the PC1, and enable or disable lock mode.
Figure 18.
1.
On the Configuration page, select
left edge of the screen. The System Settings page appears, displaying either the factory
default information for your PC1 or the settings submitted most recently.
2.
Enter your new information in the IP Settings section, or select the date and time from
the menus in the Date/Time Settings section, as described in the following sections.
System Settings Screen on the Configuration Page
System Settings
tab. There are seven web
Configuration
from the sidebar menu at the
IPL T PC1 • HTML Configuration and Control
24