Appendix A • Reference Information; Specifications - Extron electronics RGB 160 User Manual

Reference Information

Specifications

Video
Gain ................................................ Unity, (0.725 Vp-p) 50% peaking,
Bandwidth ..................................... 300 MHz (-3 dB)
Video input
Number/signal type ..................... 1 analog RGBHV, RGBS, RGsB, RsGsBs
Connectors .................................... 1 female 15-pin HD
Nominal level ................................ 0.7 Vp-p for RGB
Minimum/maximum levels ........ Analog: 0.3 V to 1.5 Vp-p with no offset at
Impedance ..................................... 75 ohms
Horizontal frequency .................... Autoscan 15 kHz to 130 kHz
Vertical frequency .......................... Autoscan 30 Hz to 120 Hz
Return loss ..................................... -30 dB @ 5 MHz
DC offset (max. allowable)........... 4.0 V
Video output
Number/signal type
RGB 160xi .......................... 1 analog RGBHV, RGBS, RGsB
RGB 164xi .......................... 2 analog RGBHV, RGBS, RGsB
Connectors
RGB 160xi ......................... 6 female BNC
RGB 164xi .......................... 2 x 6 female BNC
Nominal level ................................ 0.7 Vp-p for RGB
Minimum/maximum levels ....... Analog: 0.7 V to 0.75 Vp-p with 0.70 Vp-p
Impedance ..................................... 75 ohms
Return loss ..................................... -30 dB @ 5 MHz
Sync
Input type ...................................... RGBHV TTL (±), RGBS TTL (±),
Output type .................................... RGBHV (±), RGBS (±), RGsB (-)
Input level ..................................... 2 V to 5.5 Vp-p with ±0.2 VDC offset (max.)
Output level .................................. 4 V to 5 Vp-p, unterminated
RGB 160xi and RGB 164xi • Reference Information
A-2
(0.75 Vp-p) 100% peaking
unity gain
1 female 15-pin HD local monitor buffered
output
1 female 15-pin HD local monitor buffered
output
input
RGsB 0.3 V (-), RsGsBs 1.3 V (-)
Input impedance .......................... 510 ohms
Output impedance ....................... 75 ohms
Max. propagation delay ............... 48 ns
Max. rise/fall time ........................ 3.5 ns
Polarity............................................ RGBHV: when RGBHV is input, polarity
follows input; otherwise negative
RGBS, RGsB: negative
Audio
Gain ................................................ Unbalanced output: 0 dB;
balanced output +6 dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ................................. 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal
level
S/N ................................................. >72 dB, at maximum output (14 dBu),
balanced (unweighted)
Stereo channel separation ........... >66 dB @ 1 kHz to 20 kHz
Audio input
Number/signal type .................... 1 PC level stereo, unbalanced
Connectors .................................... (1) 3.5 mm stereo jack, 2 channel; tip (L),
ring (R), sleeve (ground)
Impedance ..................................... 5k ohms, DC coupled
Nominal level ................................ -10 dBV (316 mVrms)
Maximum level ............................. +4.2 dBu, (unbalanced) at 1% THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
Audio output
Number/signal type .................... 1 stereo (2 channel), balanced/unbalanced
Connectors .................................... (1) 3.5 mm captive screw connector, 5 pole
Impedance ..................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ...................................... ±0.1 dB channel to channel
Maximum level (600 ohm) .......... >+8.8 dBm, balanced at 1% THD+N
General
Power ............................................. 100 VAC to 240 VAC, 50/60 Hz, 15 watts,
internal, autoswitchable
MBC power jack ............................ 9.0 VDC, 150 mA
RGB 160xi and RGB 164xi • Reference Information A-3