Setting Up Your Computer After A Reset Or Recovery; Erase And Reformat The Recovery Media - HP Chromebook x360 14 G1 Maintenance And Service Manual

3. Wait while Chrome verifies the integrity of the recovery media.
NOTE:
button until the computer turns off. Do not disrupt the system recovery process after the verification
step is complete.
NOTE:
different USB flash drive or SD memory card.
4. When the "System Recovery is complete" message displays, remove the recovery media.
The computer restarts with Chrome OS reinstalled.

Setting up your computer after a reset or recovery

After a reset or recovery is complete, perform the initial setup process. For details on setting up the
computer, go to http://www.support.google.com.

Erase and reformat the recovery media

During the process of creating recovery media, the USB flash drive or SD memory card is formatted for use as
a recovery tool. After you recover your computer, you will need to erase the recovery media if you want to
reuse your USB flash drive or SD memory card to store other files. Use the steps in this section to erase the
recovery media using the Chromebook Recovery Utility.
1. Click the Launcher icon, and then click All Apps.
2. In the apps window, click Recovery.
3. Click the Settings icon, and then click Erase recovery media.
4. Select the USB flash drive or SD memory card you inserted, click Continue, and then click Erase now.
5. After the recovery media is erased, click Done to close the Chromebook Recovery Utility, and then
remove the USB flash drive or SD memory card.
The media is ready to be formatted using a formatting tool provided by your operating system.
44 Chapter 6 Backing up, resetting, and recovering
If you need to cancel the recovery during the verification process, press and hold the power
If an error message displays, you might need to run the Chrome Recovery Utility again, or use a