Setting Up Your Computer After A Reset Or Recovery; Erasing And Reformatting The Recovery Media - HP Chromebook 14a Maintenance And Service Manual

NOTE:
button until the computer turns off. Do not disrupt the system recovery process after the verification
step is complete.
NOTE:
use a different USB flash drive or SD memory card.
4. When the "System Recovery is complete" message appears, remove the recovery media.
The computer restarts with Chrome OS reinstalled.

Setting up your computer after a reset or recovery

After a reset or recovery is complete, perform the initial setup process.
For details about setting up the computer, go to http://www.support.google.com.

Erasing and reformatting the recovery media

When you create recovery media, the USB flash drive or SD memory card is formatted as a recovery tool. After
recovery, you must erase the recovery media to reuse your storage device. Follow these steps to use the
Chromebook Recovery Utility to erase the recovery media.
1. Select the Launcher icon, and then select All Apps.
2. In the apps window, select Recovery.
3. Select the Settings icon, and then select Erase recovery media.
4. Select the USB flash drive or SD memory card that you inserted, select Continue, and then select Erase
now.
5. After the recovery media is erased, select Done to close the Chromebook Recovery Utility, and then
remove the USB flash drive or SD memory card.
The media is ready to be formatted using a formatting tool provided by your operating system.
If you need to cancel the recovery during the verification process, press and hold the power
If an error message is displayed, you might need to run the Chrome Recovery Utility again or
Setting up your computer after a reset or recovery 51