Advanced Routing; Static Routing List - TP-Link TL-WR940N User Manual

4.12 Advanced Routing

Figure 4-56 Advanced Routing
There are two submenus under the Advanced Routing menu as shown in Figure 4-56: Static
Routing List and System Routing Table. Click any of them, and you will be able to configure the
corresponding function.

4.12.1 Static Routing List

Choose menu "Advanced Routing → Static Routing List", and then you can configure the
static route in the next screen (shown in Figure 4-57). A static route is a pre-determined path that
network information must travel to reach a specific host or network.
To add static routing entries:
1. Click Add New... shown in Figure 4-57, you will see the following screen.
2. Enter the following data:
TL-WR940N/TL-WR941ND
Figure 4-57 Static Routing
Figure 4-58 Add or Modify a Static Route Entry
300Mbps Wireless N Router
-71-