TP-Link TL-WR940N User Manual page 20

2. After successfully login, you can click the Quick Setup to quickly configure your router.
Note:
The Router will automatically detect the Internet connection. If the Internet is available, the Router
will direct you to step 5 Wireless settings; otherwise, you need to continue with step 3 to choose
WAN Connection Type.
3. Click Next, and then WAN Connection Type page will appear, shown in Figure 3-6.
The router provides Auto-Detect function and supports five popular ways Dynamic IP,
Static IP, PPPoE/Russian PPPoE, L2TP/Russian L2TP and PPTP/Russian PPTP to
connect to the Internet. It's recommended that you make use of the Auto-Detect function. If
you select Auto-Detect, the router will automatically detect the connection type your ISP
provides. If you are sure of what kind of connection type your ISP provides, you can select
the very type and click Next to go on configuring.
TL-WR940N/TL-WR941ND
Figure 3-5 Quick Setup
Figure 3-6 Choose WAN Connection Type
-11-
300Mbps Wireless N Router