TP-Link TL-WR940N User Manual page 25

Select Static IP if IP Address/ Subnet Mask/ Gateway and DNS server address have been
provided by your ISP. Then please enter server IP address or domain name provided by your
ISP, and also enter the corresponding parameters.
5. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-12.
Wireless Radio - Enable or disable the wireless radio.
Wireless Network Name - Enter a string of up to 32 characters. The same name of
SSID (Service Set Identification) must be assigned to all wireless devices in your
network. Considering your wireless network security, the default SSID is set to be
TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each router's
MAC address). This value is case-sensitive. For example, TEST is NOT the same as
test.
Region - Select your region from the pull-down list. This field specifies the region where
the wireless function of the router can be used. It may be illegal to use the wireless
function of the router in a region other than one of those specified in this field. If your
TL-WR940N/TL-WR941ND
Figure 3-12 Quick Setup – Wireless
-16-
300Mbps Wireless N Router