TP-Link TL-WR940N User Manual page 38

User Name/Password - Enter the User Name and Password provided by your ISP. These
fields are case-sensitive.
Dynamic IP/ Static IP - Choose either as you are given by your ISP. Click the Connect button
to connect immediately. Click the Disconnect button to disconnect immediately.
Connect on Demand - You can configure the router to disconnect from your Internet
connection after a specified period of inactivity (Max Idle Time). If your Internet connection has
been terminated due to inactivity, Connect on Demand enables the router to automatically
re-establish your connection as soon as you attempt to access the Internet again. If you wish to
activate Connect on Demand, click the radio button. If you want your Internet connection to
remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of
minutes you want to have elapsed before your Internet connection terminates.
Connect Automatically - Connect automatically after the router is disconnected. To use this
option, click the radio button.
TL-WR940N/TL-WR941ND
Figure 4-11 L2TP Settings
-29-
300Mbps Wireless N Router