Connecting Printers To The Axis Printpoint 140 Bjc - Axis PrintPoint 140 BJC User Manual

Connecting Printers to the AXIS PrintPoint 140 BJC

Caution
Connect a Printer:
Test the Connection:
AXIS PrintPoint 140 BJC User's Manual
Make sure that the external power supply is marked with the correct
mains voltage.
1. Switch off the printer.
2. Connect the AXIS PrintPoint 140 BJC to the printer, either
directly to the parallel printer port, or using the optional velcro
ribbons and printer cable extension.
3. Connect the external power supply to the AXIS PrintPoint 140
BJC. The Power Indicator should now be permanently lit and the
Network Indicator will start to flash during the power up and self
test routines. The AXIS PrintPoint 140 BJC is ready for use when
the Network Indicator stops flashing and remains off.
1. Switch on the printer.
2. Press and release the test button on the AXIS PrintPoint 140 BJC
to print a test page.
The test page shows the most important parameters as well as the
firmware version number. For some types of printers, the printer's
internal test page will be printed instead of the print server's test page.
However, all you need to be concerned with at this stage is whether
the test page has printed satisfactorily or not.
Section 2: Basic Installation
15