Axis PrintPoint 140 BJC User Manual page 10

Windows
Environments
OS/2
Environments
AXIS PrintPoint 140 BJC User's Manual
It is compatible with both NetWare 4.10 NDS and bindery
emulation, as well as NetWare 3.11, 3.12.
In Print Server Mode, the AXIS PrintPoint 140 BJC emulates a
NetWare Print Server, while in Remote Printer Mode it emulates a
workstation running RPRINTER or NPRINTER. Logical printers are
supported in both bindery and NDS modes for both PSERVER and
NPRINTER.
Unless you wish to change the default name of your AXIS PrintPoint
140 BJC, the setup operation within the Windows environment may
be performed solely with the AXIS Print Monitor, or the AXIS Print
Utility for Windows. Windows 3.1, Windows for Workgroups,
Windows 95 and Windows NT are all supported. The AXIS
PrintPoint 140 BJC is also fully compatible with Windows clients
operating on LANtastic networks.
The AXIS Print Monitor supplied on the AXIS Utilities diskette, is
the recommended tool for network printing within Windows 95 and
Windows NT environments. It allows users to connect AXIS Network
Print Servers in the same simple fashion as any local printer port. Pop-
up messages can also be appropriately displayed to show the status of
the peer-to-peer print jobs.
Use the AXIS Print Utility for Windows supplied on the AXIS
Utilities diskette for printing within Windows for Workgroups and
Windows 3.1 environments.
Unless you wish to change the default name of your AXIS PrintPoint
140 BJC, the setup operation in an OS/2 environment may be
performed solely with the supplied AXIS Print Utility for OS/2.
Use the AXIS Print Utility for OS/2 to install and integrate the AXIS
PrintPoint 140 BJC into the OS/2 spool system. The printers attached
to the AXIS PrintPoint 140 BJC will then appear to be directly
connected to the file server, and may be used by any client on your
network.
Section 1: Introduction
9