Axis PrintPoint 140 BJC User Manual page 33

Print server for all networks

Hide thumbs Also See for PrintPoint 140 BJC:

Table of Contents

NetWare

Section 3: Setting Up - NetWare

To connect a print queue to a print server port, select the print server

Print Queue

Connection

port you wish to connect from the NetWare Network Environments

window. Click Connect...

The Connect NetWare Print Queues window detailed below, will

then be displayed.

The AXIS NetPilot™ Connect NetWare Print Queues window

Select the location of the print queue from the Resources box.

Click either on an existing NetWare print queue for connection to the

server port, or alternatively create a new print queue by clicking on

Create Queue...

To define the method of printing to be used, select either Print Server

Mode or Remote Printer Mode. If you use Remote Printer Mode you

must enter the NetWare Print Server name, or make an appropriate

selection that will work with the AXIS PrintPoint 140 BJC print

server, using the Browse... button.

Finally, click the OK button to return to the Network Environments

window.

AXIS PrintPoint 140 BJC User's Manual

Table of Contents