Axis PrintPoint 140 BJC User Manual page 24

The Internet Address
and Host Name in
Your Host Table
Caution
AXIS PrintPoint 140 BJC User's Manual
Enter the Internet address and Host name into your host table using
the following step-by-step instructions:
1. Acquire an unused Internet address from your Network
Administrator and decide upon an appropriate and unique name
for your AXIS PrintPoint 140 BJC.
2. Add the Internet address and host name to your system host table.
On most systems, this is done by appending the following line to
the
/etc/hosts
<Internet address>
Example:
192.168.3.191
3. Update your Alias Name data base. If your system utilizes alias
name data bases such as Yellow Pages (YP) or Network
Information Services (NIS), you should update these. On most
systems this is done by entering the following commands:
cd /var/yp
make
DO NOT use the default or example Internet address when installing
your AXIS PrintPoint 140 BJC. Always consult your Network
Administrator before assigning an Internet address.
Section 2: Basic Installation
file:
<host name>
npsname
23