Table of Contents
Advertisement
Section 3: Printing from Windows 95/98/NT4/2000/XP
22
Adding NetBIOS/NetBEUI Printers in Windows 2000 using AXIS Print Monitor
See to it that the NetBEUI protocol is installed on your client. Follow
the procedure below to install Axis Printer Ports from a Windows
2000 workstation:
1. To start the Add Printer Wizard, select Settings | Printers from
the Start menu and double-click the Add Printer icon. Start the
installation by clicking Next.
2. The Wizard asks you to select Local printer or Network printer.
Select Local printer and click Next.
3. Click Create a new port. In the Available Ports dialog, select AXIS
Port and click Next.
4. Select NetBIOS/NetBEUI as your choice of network protocol and
click OK.
5. Select the AXIS Port you want to add from the list of available ports.
The port appears as <name>.<port> AXIS100086.LP1
The port is LP1.
6. Choose the appropriate printer driver for your printer. Click Next
and proceed directly to step 9. It is only necessary to perform steps
7 - 8 if your printer does not appear in the list.
Note:
Even if the desired printer is available in the Manufacturers and
Printers lists, you are advised to use the printer driver provided
with the printer. This assures you of the latest driver software.
7. Click the Have Disk... button. Insert the printer driver diskette/CD
that was provided with your printer, select the appropriate
diskette/CD drive and click OK.
8. Select the printer driver you want to install and click Next.
9. Enter an appropriate name for your printer and click Next.
User's Manual
Advertisement
Table of Contents
