Axis PrintPoint 140 BJC User Manual page 57

Section 5: Setting Up - OS/2
About AXIS Print
Utility for OS/2
Note:
Install the AXIS
PrintPoint 140 BJC
Note:
56
AXIS Print Utility for OS/2 is a dual purpose application for network
printing in the OS/2 environment. Its fundamental purpose is to:
1. Install and maintain the AXIS PrintPoint 140 BJC printer port as
an OS/2 printer port.
2. Capture and monitor print jobs directed to the AXIS PrintPoint
140 BJC port. Print jobs may be directed through a spool
directory either at your local hard disk, or at the file server. The
printer port status of your AXIS PrintPoint 140 BJC may be
monitored and pop-up notification messages can be generated,
keeping you informed of completed print jobs or any problematic
condition.
The NetBEUI protocol must be active. If not, use MPTS/LAPS
(LAN Server) to activate it.
1. When AXIS Print Utility for OS/2 is running, click Install to
install your AXIS PrintPoint 140 BJC. It will then appear in the
list as <name>.LP1, where <name> is AX followed by last six
digits of your print server number. e.g. AX100086.LP1. However,
this alphanumeric name will be superseded by any new name
given to your AXIS PrintPoint 140 BJC when using AXIS
NetPilot™.
2. Select the port that you wish to install, then click Install.
Repeat this procedure for each server using the AXIS PrintPoint 140
BJC.
The AXIS Print Utility for OS/2 must be running in order to
print using your AXIS PrintPoint 140 BJC.
AXIS PrintPoint 140 BJC User's Manual