Axis PrintPoint 140 BJC User Manual page 45

Section 4: Setting Up - Windows
Note:
Using the
AXIS Print Monitor
with Windows NT
44
7. Choose when Status Pop-up messages are to be displayed from the
Configure AXIS Printer Ports dialog. A help facility is available
should you require any additional information. Check the
appropriate boxes and then click Next>.
8. Enter an appropriate name for your printer and click Next>.
9. Choose whether you wish to produce a Test Page and then click
Finish.
Even if the desired print driver is available from the manufacturer
and model lists, use the driver on the diskette that comes along
with the printer. This assures you of the latest driver software.
Follow the procedure below to install Axis Printer Ports from a
Windows NT workstation:
1. To start the Add Printer Wizard, select Settings - Printers from
the Start menu and double-click on the Add Printer icon.
2. The Wizard asks you to select between My Computer and
Network Printer Server. Select My Computer.
3. Before an AXIS Port can be used, it must be added. When the
Available ports dialog is active, click Add Port..., select AXIS Port
and then click New Port...
4. Select the AXIS printer port you wish to add and then click OK.
The port appears as <name>.LP1, where <name> is AX followed
by the last six digits of the AXIS PrintPoint 140 BJC serial
number, e.g. AX560B35. Click OK.
5. Close the Printer Ports window.
6. Click the Configure Port... button and choose when Pop-up
messages are to be displayed. It is possible to configure AXIS Ports
to issue Pop-up messages when the printer is Off-line, Out of
paper or Not responding. Check the appropriate boxes and then
click OK. Continue the installation by clicking Next>.
AXIS PrintPoint 140 BJC User's Manual