Axis PrintPoint 140 BJC User Manual page 49

Section 4: Setting Up - Windows
Windows for
Workgroups
Peer-to-Peer Printing
Note:
48
Follow these steps to install your AXIS PrintPoint 140 BJC for
peer-to-peer printing at a Windows for Workgroups workstation:
1. Double-click the AXIS Print Utility icon.
2. In the Port menu, click Add.
3. In the NPS Port list, select the AXIS PrintPoint 140 BJC port to
be installed. The port will appear as <name>.LP1, where <name>
is AX followed by last six digits of your print server number
e.g. AX100086.LP1. However, this alphanumeric name will be
superseded by any new name given to your AXIS PrintPoint 140
BJC when using AXIS NetPilot™.
4. Accept or change the suggested Windows port name and type any
required comment in the Description field. Make a note of the
Windows port name as you will need this later, then click OK to
install the Windows port.
5. In the Port menu, click Connect... to bring up the Windows
Printers dialog.
6. Select a printer driver from the list of Installed Printers (or click
Add>> to install a new driver), then click Connect...
7. Select the Windows port name from step 4 above (this name can
be found at the bottom of the Ports list).
8. Click OK to close the Connect dialog, and Close to close Printers.
The setup is completed and you can now print through your
AXIS PrintPoint 140 BJC.
The AXIS Print Utility for Windows must be running when you
print through your AXIS PrintPoint 140 BJC. We strongly
recommend that you copy the AXIS Print Utility icon into your
StartUp folder.
AXIS PrintPoint 140 BJC User's Manual