Axis 950 User Manual page 49

UNIX (NFS)
AXIS 850/950 User's Manual
When accessing the CD-ROM server using NFS, you may restrict the
access to users with a certain IP Address, Group ID (GID) or User ID
(UID).
The access is controlled by creating or editing NFSIPAddress,
NFSGroup and NFSUser entries in the access control files in the
volumes folder on the CD-ROM server. The following values can be
used:
NFSIPAddress Description
Users with any IP address is granted access
*
Only users with the specified IP address have access
<any IP address>
IP address is not used to grant access
<entry not present>
NFSGroup Description
* Users with any GID may access the folder or CD-ROM
<Group ID> Only users with the specified GID have access
GID is not used to grant access
<entry not present>
NFSUser Description
Users with any UID may access the folder or CD-ROM
*
Only users with the specified UID have access
<User ID>
<entry not present> UID is not used to grant access
Please note that there is an 'or' relation between the NFS access
control parameters. A user fulfilling any of the NFS access criteria you
have specified will be granted access. This means that if you set any of
the parameters to ' ', all users will have access regardless of the settings
*
of the other parameters.
You may add as many NFSIPAddress, NFSGroup and NFSUser
parameters as you require. See also the examples below. To set up the
parameters, do as follows:
1. Locate the proper file in the volumes folder.
2. Open the file using your favourite editor.
3. Edit, add or remove NFSIPAddress, NFSGroup and NFSUser
entries as required.
Section 5: Access Control and Set-up
InternetAddress
ServerName
NetMask
49