Axis 950 User Manual page 39

Note:
Windows NT
AXIS 850/950 User's Manual
Section 4: Using the Axis CD-ROM Server
If you have removed the default workgroup named 'Workgroup'
the Axis CD-ROM server will not be visible in the browser until
an existing workgroup has been specified in the CD-ROM server
configuration file. To connect to the CD-ROM simply enter
\\AXIS<nnnnnn>\root,
the CD-ROM server serial number, in the 'Path' box and click
OK.
1. Start the File Manager.
2. From the Disk menu, select Connect Network Drive...
3. In the Path box, enter
are the six last digits of your Axis CD-ROM server
<nnnnnn>
serial number and
Example (root level access):
\\AXISCD000B\root
Example (cd drive access):
\\AXISCD000B\cd
Example (CD-ROM access):
If your CD-ROM is named cd_18881, enter:
\\AXISCD000B\cd_18881
4. Select a drive letter for your CD-ROM server.
5. Check Reconnect at Startup if you wish to use the CD-ROM
server under the same drive letter the next time you start you
computer.
6. Click the OK button. The CD-ROM server is ready for use.
where
<nnnnnn>
\\AXIS<nnnnnn>\<folder>,
is any CD-ROM server folder.
<folder>
<cd0>
<cd1>
...
<cd6>
are the six last digits of
where
39