Axis 950 User Manual page 32

Section 4: Using the Axis CD-ROM Server
<cd0>
<cd1>
...
<cd6>
DOS
32
The CD-ROM server is mounted using the map command.
1. Use the map command to mount the CD-ROM server.
At the DOS prompt, type:
map root <drive letter>:AXIS<nnnnnn>_NW/<path>
are the six last digits of your Axis CD-ROM server
<nnnnnn>
serial number and
folder or to any file on an inserted CD-ROM.
Example (root level access):
To access the root level of your CD-ROM server with serial
number is 00408CCD000B under the drive letter E, type:
map root E:AXISCD000B_NW/SYS:
Example (cd drive access):
If your CD-ROM server serial number is 00408CCD000B, and
you want to be able to access all the CD-ROMs under the drive
letter F, type:
map root F:AXISCD000B_NW/SYS:/CD
Example (CD-ROM access):
If your CD-ROM server serial number is 00408CCD000B, and
you want to map a CD-ROM named cd_18881 to drive G, type:
map root G:AXISCD000B:NW/SYS:/CD/cd_18881
2. To make the connections permanent, edit your autoexec.bat
file to include your map commands.
is the path to any CD-ROM server
<path>
AXIS 850/950 User's Manual
, where