Axis 950 User Manual page 41

Notes:
AXIS 850/950 User's Manual
Section 4: Using the Axis CD-ROM Server
3. From the Connection menu, select Create. The following
dialogue is shown:
4. In the Workstation field, enter
are the last six digits of your Axis CD-ROM server
<nnnnnn>
serial number.
5. In the Share/alias field enter the name of any CD-ROM server
folder or inserted CD-ROM.
• For root level access, type
• For cd drive access, type
• For CD-ROM access, type the volume name of the CD-
ROM, for example
6. In the Local device name field, select a drive letter for your
CD-ROM server.
7. Click Create. The CD-ROM server is ready for use.
Please note that CD-ROM server folders will not be visible on the
Desktop in OS/2 versions prior to OS/2 WARP Connect. If you
wish to use an earlier version of OS/2, we recommend using third
party NFS software to connect to the CD-ROM server.
AXIS<nnnnnn>,
.
root
.
cd
.
cd_18881
<cd0>
<cd1>
...
<cd6>
where
41