Axis 950 User Manual page 11

AXIS 850/950 User's Manual
3. Set the SCSI address of the external drive. Each connected
drive must have a unique SCSI address. SCSI addresses 0 through
6 may be used. For Axis 851 and Axis 951 we recommend SCSI
address 0 for the internal drive. See the CD-ROM drive
documentation for instructions on how to set the address.
4. Connect a SCSI terminator to the last drive in the SCSI chain.
All other external CD-ROM drives must not be terminated. See
also "SCSI Devices and Termination" on page 12. For
instructions, see the CD-ROM drive documentation.
5. Connect power to all external CD-ROM drives and switch
them on.
6. Connect power to the Axis CD-ROM Server. The CD-ROM
server indicators will flash during power-on and self-test. When
the STATUS indicator stops flashing and remains unlit, the CD-
ROM server is ready for use.
Section 2: Basic Installation
11