Axis 950 User Manual page 29

Windows for
Workgroups
AXIS 850/950 User's Manual
Section 4: Using the Axis CD-ROM Server
10. Check Reconnect at Logon if you wish to use the CD-ROM
server under the same drive letter the next time you start you
computer.
11. Click the OK button. The CD-ROM server is ready for use.
1. Start the File Manager.
2. From the Disk menu, select Connect Network Drive... The
following screen is displayed:
Make sure that you have selected the file server button. If you also
have Microsoft Network installed, you may have to click the
button labelled 'NetWare...' to display the screen.
3. Select the entry for your new CD-ROM server. The default
name is
AXIS<nnnnnn>_NW
of the CD-ROM server serial number. Please note that the
'Bindery' option in 'NetWare Settings' on your computer must be
checked in order for the CD-ROM server to be listed.
4. Click the Login button.
5. Enter your user name and password. Before the CD-ROM
server has been set up, all users have full access to it.
, where are the last six digits
<nnnnnn>
<cd0>
<cd1>
...
<cd6>
29