Axis 950 User Manual page 46

InternetAddress
Section 5: Access Control and Set-up
ServerName
NetMask
NetWare
46
Example:
The format of the access control file is shown below:
Name
Alias
UserLimit
SessionTimeout
NetWareUser/Group = *
NFSIPAddress
NFSGroup
NFSUser
SMBPassword
[END]
• Name is the volume name of the CD-ROM disk or cd_nnnnn,
where nnnnn is an unique five digit number if the disk has no
volume name.
• Alias is the name displayed in the cd folder. By editing this entry,
you can select a name that makes sense to the users of the CD-
ROM. The name must be a unique and valid volume name.
• UserLimit is the maximum number of simultaneous users of the
CD-ROM. When set to 0 any number of users may access the
disk.
• SessionTimeout specifies how many seconds a user is considered
to be active after the last access to the disk. After the time has
expired, another user may access the disk and perhaps lock out the
first user, depending on the User Limit setting.
Below, you will see how to set up access restrictions in the supported
network environments.
To restrict access to the CD-ROM server in the NetWare
environment you must first specify an Authentication Server in the
CD-ROM server config.ini file. See "CD-ROM Server Set-up" on
page 51.
Before the Authentication server has been selected, you can choose
between granting all users guest access or to limit access to the user
'supervisor' using the password specified in the config.ini file.
= cd_18881
= cd_18881
= 0
= 0
= *
= *
= *
= *
AXIS 850/950 User's Manual