Electrolux CXH09HL1W User Manual page 18

18 www.electroluxaircomfort.com
Check after installation
Items to be checked
Has the unit been affi xed fi rmly?
Have you done the refrigerant leakage test?
Is the thermal insulation suffi cient?
Is the water drainage satisfactory?
Is the voltage in accordance with the rated voltage on the
nameplate?
Is the electrical wiring or piping connection installed
correctly and securely?
Has the unit been securely grounded?
Is the mains cable as specifi ed?
Is the air inlet or the air outlet blocked?
Is the length of the connection pipes and the refrigerant
capacity as specifi ed
Is the length of the connection pipes and the refrigerant
capacity as specifi ed
Operation test
Before operation test
• Do not connect the unit to the power supply
before the installation is completed.
• The electrical wiring must be connected cor-
rectly and securely.
• The cut-off valves of the connection pipes
must be opened. Refer to the section "Vacu-
uming and leakage test".
• The unit must be cleaned thoroughly.
Operation test method
1. Connect the unit to the power supply.
2. Press the ON/OFF button to switch on the
unit.
3. Press the MODE button to set the operation
mode and check whether the operation is as
expected.
Possible malfunction
The unit may drop, shake or emit noise.
Insuffi cient cooling or heating.
Condensation.
Water leakage.
Electrical malfunction or damage to the unit.
Electrical malfunction or damage to the parts.
Electrical leakage.
Electrical malfunction or damage to parts.
Insuffi cient cooling or heating.
Inaccurate refrigerant capacity.
Inaccurate refrigerant capacity.