Chapter 3: Maintenance, Technical Specifications and Regulatory Information
34
It is important that while you are operating your workstation you keep all
the covers and doors, including the plastics, in place. The shielded cables
that came with the system and its peripherals should be installed correctly,
with all thumbscrews fastened securely.
An ESD wrist strap is included with some products, such as memory and
graphics upgrades. The wrist strap is used when installing these upgrades
to prevent the flow of static electricity, and it should protect your system
from ESD damage.
Shielded Cables
The workstation is FCC-compliant under test conditions that include the use
of shielded cables between the workstation and its peripherals. Your
workstation and any peripherals you purchase from Silicon Graphics have
shielded cables. Shielded cables reduce the possibility of interference with
radio, television, and other devices. If you use any cables that are not from
Silicon Graphics, make sure they are shielded. Telephone cables do not need
to be shielded.
The monitor cable supplied with your system uses additional filtering
molded into the cable jacket to reduce radio frequency interference. Always
use the cable supplied with your system. If your monitor cable becomes
damaged, a replacement cable should be obtained from Silicon Graphics.
Product Safety
Caution: The power cord is used as a disconnect device. The socket outlet
must be installed near the equipment and must be easily accessible.
Achtung: Die Netzzuleitung dient als Trennvorrichtung. Die Steckdose
sollte sich nahe am Gerät befinden und leicht zugänglich sein.