Setting Up And Using The Presenter Monitor; Setting Up The Presenter Monitor - Silicon Graphics Presenter Owner's Manual

Setting Up the Presenter Monitor

Chapter 1
1.

Setting Up and Using the Presenter Monitor

This chapter explains how to set up Presenter as a monitor for your
workstation, and how to use it on the customized Dukane overhead
projector to project images on a screen.
Before using Presenter, make sure the Presenter adapter board has been
installed in your workstation.
Caution: Your Presenter monitor is designed to function at maximum
performance and reliability with the Dukane Overhead Projector. If you use
another projector, cooling of the display, stable mounting, and brightness of
the projected image will all be compromised. A bright overhead projector
without proper cooling of the display may cause permanent damage to Presenter.
To set up Presenter with the workstation, follow these steps.
1. Unpack the Presenter monitor.
Don't be concerned that the name on the Presenter monitor is
Note:
"Indy Presenter." With the Presenter adapter board installed, the Indy
Presenter works on other workstations.
Lift the Presenter monitor and the external cables from the box. It's
a good idea to save the original shipping materials in the event that
you need to return it for service.
Remove Presenter from the plastic bag.
1