Turn Signals; Lane Change Assist; Lights-On Reminder - Jeep Wrangler 2013 Owner's Manual

Turn Signals

Move the multifunction lever up or down and the arrows
on each side of the instrument cluster flash to show
proper operation of the front and rear turn signal lights.
Turn Signal Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171
NOTE:
• If either light remains on and does not flash, or there is
a very fast flash rate, check for a defective outside light
bulb. If an indicator fails to light when the lever is
moved, it would suggest that the indicator bulb is
defective.
• A tone will chime if the turn signals are left on for more
than 1 mile (2 km).

Lane Change Assist

Tap the lever up or down once, without moving beyond
the detent, and the turn signal (right or left) will flash
three times then automatically turn off.

Lights-On Reminder

If the headlights or parking lights are left on after the
ignition is turned OFF, a chime will sound to alert the
driver when the driver's door is opened.
3