Windshield Wiper Operation; Intermittent Wiper System - Jeep Wrangler 2013 Owner's Manual

Hide thumbs Also See for Wrangler 2013:

Table of Contents

Windshield Wiper Operation

Rotate the end of the lever upward to the second detent

past the intermittent settings for low-speed wiper opera-

tion. Rotate the end of the lever upward to the third

detent past the intermittent settings for high-speed wiper

Front Wiper Control

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177

In cold weather, always turn off the wiper switch and

allow the wipers to return to the park position before

turning off the engine. If the wiper switch is left on

and the wipers freeze to the windshield, damage to

the wiper motor may occur when the vehicle is

Use the intermittent wiper when weather conditions

make a single wiping cycle, with a variable pause be-

tween cycles, desirable. Rotate the end of the lever to the

first detent position for one of five intermittent settings.

The delay cycle can be set anywhere between 1 to

Table of Contents