Jeep Wrangler 2013 Owner's Manual page 343

Voice Command Button Uconnect® Phone — If
Equipped
Press this button to operate the Uconnect® Phone feature
(if equipped). Refer to "Voice Command" for further
details.
If your vehicle is not equipped with or this feature is not
available on your vehicle, a "Not Equipped With
Uconnect Phone" message will display on the radio
screen.
Phone Button Uconnect® Phone — If Equipped
Press this button to operate the Uconnect® Phone feature
(if equipped). Refer to "Uconnect® Phone" for further
details.
If your vehicle is not equipped with or this feature is not
available on your vehicle, a "Not Equipped With
Uconnect Phone" message will display on the radio
screen.
UNDERSTANDING YOUR INSTRUMENT PANEL 341
TIME Button
Press the TIME button to alternate locations of the time
and frequency display.
Clock Setting Procedure
1. Press and hold the TIME button until the hours blink.
2. Adjust the hours by turning the right side TUNE/
SCROLL control knob.
3. After adjusting the hours, press the right side TUNE/
SCROLL control knob to set the minutes. The minutes
will begin to blink.
4. Adjust the minutes using the right side TUNE/
SCROLL control knob. Press the TUNE/SCROLL con-
trol knob to save the time change.
5. To exit, press any button/knob or wait five seconds.
4