Axle Lock (Tru-Lok®) - Rubicon Models - Jeep Wrangler 2013 Owner's Manual

Hide thumbs Also See for Wrangler 2013:

Table of Contents

438 STARTING AND OPERATING

AXLE LOCK (TRU–LOK®) — RUBICON MODELS

The AXLE LOCK switch is located on the instrument

panel (to the left of the steering column).

Axle Lock Switch

This feature will only activate when the following con-

ditions are met:

• Key in ignition, vehicle in 4L (Low) range.

• Vehicle speed should be 10 mph (16 km/h) or less.

To activate the system, press the bottom of the AXLE

LOCK switch once to lock the rear axle only (the "Rear

Axle Lock Indicator Light" will illuminate), press the

bottom of the switch again to lock the front axle (the

"Front Axle Lock Indicator Light" will illuminate). When

the rear axle is locked, pressing the switch again will lock

or unlock the front axle.

NOTE: The indicator lights will flash until the axles are

fully locked or unlocked.

Chapters

Table of Contents