Table of Contents
Advertisement
User Manual
Aastra DT69x DECT Telephones
Priority
The default order of priority is the order of entered subscriptions. This means that the first
subscribed system has the highest priority. This list can be edited by the user. It is possible
to set the systems in priority by moving them up or down in the list.
NOTE: This is used in combination with system set to be "Automatic", see
page 32.
1
Select "Priority".
2
Change the priority if needed by selecting "Up" or "Down". The priority will be saved
when "Back" is selected.
7.1.4
In Charger Action when in Call
It is possible to determine actions to be performed when a handset is placed in charger
during a call.
1
Select "In charger".
2
Select "Call behavior".
3
Select one of the following:
• No action - no action will be performed when handset is placed in charger during a
call.
• Loudspeaking - The loudspeaker will be activated when handset is placed in
charger during a call.
• End call - The call will be disconnected when handset is placed in charger.
7.1.5
In Charger Action when not in Call
It is possible to determine actions to be performed when a handset is not in call and placed
in charger.
NOTE: Additional In charger actions can also be configured, see the handset's Configuration
Manual.
1
Select "In charger".
2
Select "Other actions".
3
Select one of the following:
• No action - no action will be performed when handset is not in call and placed in
charger.
• Switch off - When the handset is placed in the charger it will switch off. When it is
removed from the charger it will switch on again.
• Sound off - When the handset is placed in the charger it will be muted. When it is
removed from the charger it will switch on the sound again. Note: Messages with
breakthrough (for example high/alarm priority) will not be muted.
• Redirect - Calls can be redirected to another extension when the handset is placed
in a charger. This function must be programmed in the PBX to be able to redirect
calls.
• Change profile - when the handset is placed in the charger it will change profile.
When the handset is removed from the charger, the profile is changed back
Press "Edit" and select the wanted profile. By default only the profile Normal is
selectable, but additional profiles will be visible if they are configured. See
31 October 2013 / Ver. H
TD 92474EN
Change System
on
7.7
34
Advertisement
Table of Contents
