Connection To Rs-232C Device - Fujitsu IP-9500e User Manual

2.5
2.5
The [232C] connector of IP-9500e is the RS-232C communication terminal.
IP-9500e is the D-sub 9 pins (male) and the specification is DTE. Use a cross connection or straight
cable corresponding to the connected device. See Section 4.2, "Cable and Connector Details."
The figure below shows the connection method.
For details about connectors and cables, see Section 4.2, "Cable and Connector Details."
NOTE:
For electrical specifications, see Appendix 2.3, "Function Specifications."
Figure Connection to RS-232C input/output device
Connection to RS-232C
Device
PUSH PUSH
Chapter 2 Installation and Connection
D-sub 9 pin female
Data communication
device
25
The terminal of
IP-9500e