Connection To Rs-232C Device - Fujitsu IP-920E Hardware User's Manual

Chapter 1 Preparations
2.5
2.5
IP-920E/IP-920D [RS-232C] connector works as communication port. The physical connector of
IP-920E/IP-920D is the D-sub 9 pins (male) and the specification is DTE. Use a cross connection or
straight cable corresponding to the connected device. Refer to Section 4.2, "Cable and Connector
Details" for details.
The figure below shows the connection method.
For details about connectors and cables, refer to Section 4.2, "Cable and Connector
NOTE:
Details."
For electrical specifications, refer to Appendix 2.3, "Function Specifications."
IP-920E/IP-920D

Connection to RS-232C Device

100-240V
PWR ALM
FG
Figure Connection to RS-232C input/output device
10/100BASE RS-232C
E
100M
OPT
LINK
RDY IN
/ACT
DWN
MNT
Data communication
device
42
ANALOG AUDIO IN
D-sub9pin（female）