Hard Drive - HP 210 G1 Maintenance And Service Manual

Hard drive

NOTE: The hard drive spare part kit does not include the hard drive bracket, hard drive connector
cable, and screws. These components are included in the Hard Drive Hardware Kit, spare part
number 731424-001.
Description
500 GB, 5400 rpm, 7.0 mm, for use on all computer models
320 GB, 5400 rpm, 7.0 mm, for use only on HP Pavilion TouchSmart 11 Notebook, HP Pavilion
11 Notebook, or HP 215 G1 Notebook PC computer models
Before removing the hard drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Remove the service door (see
Remove the hard drive:
1. Disconnect the hard drive connector cable (1) from the system board.
2. Release the hard drive connector cable from the routing channel (2) built into the base
enclosure.
3. Remove the four Phillips PM2.0×2.75 screws (3) that secure the hard drive to the computer.
42 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page 40).
Service door on page
Spare part number
683802-001
645193-001
41).