Table of Contents
Advertisement
4
Removal and replacement procedures
preliminary requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screw driver
●
Magnetic screw driver
●
Phillips P0 and P1 screw drivers
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE:
As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
CAUTION:
Use care when handling the plastic parts. Apply pressure only at the points designated in the
maintenance instructions.
34
Chapter 4 Removal and replacement procedures preliminary requirements
Using excessive force during disassembly and reassembly can damage plastic parts.
Hide quick links:
Advertisement
Table of Contents
