Table of Contents
Advertisement
Using the system
The rocker switch
A
and the button
⇒ f ig.
6.
Selecting the memory
Short-term pressing of the button
–
select the desired memory.
Selecting the functions
–
Press the top or bottom rocker switch
way, call up in sequence the individual functions of the multi-functional indica-
tor.
Setting function to zero
–
Select the memory you want.
–
Press button
B
for more than 1 second.
The following readouts of the selected memory will be set to zero by button
● average fuel consumption;
● distance driven;
● average speed;
● Driving time.
You can only operate the multi-functional indicator when the ignition is switched
on. After the ignition is switched on, the function displayed is the one which you
last selected before switching off the ignition.
Using the system
Safety
Fig. 6 Multi-functional indicator: Control
elements
B
are located on the windshield wiper lever
on the windshield wiper lever allows to
B
A
for longer than 0.5 seconds. In this
Driving Tips
General Maintenance
Outside temperature
The outside temperature appears in the display when the ignition is switched on.
If the outside temperature drops below +4 °C, a snow flake symbol (warning signal
for ice on the road) appears in front of the temperature indicator and flashes for
10 seconds, then remains displayed together with the outside temperature. At the
same time an audible signal sounds. After pressing the rocker switch
⇒ f ig.
windshield wiper lever
WARNING
Do not only rely upon the information given on the outside temperature dis-
play that there is no ice on the road. Please note that black ice may also be
present on the road surface even at temperatures around +4 °C – warning,
drive with care!
Driving time
The driving time which has elapsed since the memory was last erased, appears in
the display ⇒ p age 14. If you wish to calculate the driving time from a particular
time of day you must first erase the memory at this moment in time by pressing
⇒ f ig.
the button
B
6.
The maximum distance indicated in both memories is 19 hours and 59 minutes.
99 hours and 59 minutes in vehicles with an Information display. The indicator is
set back to null if this period is exceeded.
Current fuel consumption
:
B
The current fuel consumption level is shown in the display in litres/100 km. This
information can help you to adapt your style of driving to the fuel consumption
you wish to achieve.
The display appears in litres/hour if the vehicle is stationary or driving at a low
speed.
The indicated value will be updated every 0.5 seconds while you are driving.
Breakdown assis-
tance
Instruments and warning lights
6, the function which was shown last is indicated.
Praktik
Technical data
15
A
on the
Advertisement
Table of Contents
