Table of Contents
Advertisement
76
Heating and air conditioning system
Air flow to the windshield, head, upper body and feet
6
Recirculated air mode
7
8
Air conditioning system switched on
9
Set blower speed
Buttons/control dial
Setting the blower speed
10
Interior temperature sensor
11
Automatic mode
12
De-mist or de-ice the windshield
13
Air flow to the windows
14
Air flow to head
15
Air flow in the footwell
16
Recirculated air mode
17
Air conditioning system switched on
18
Note
The interior temperature sensor
11
not glue or cover over the sensor, otherwise it could have an unfavourable effect
on the Climatronic.
Automatic mode
The automatic mode is used in order to maintain a constant tem-
perature and to demist the windows in the interior of the car.
Switching automatic mode on
Set a temperature between +18 ℃ (64 °F) and +29 ℃ (86 °F).
–
–
Move the air outlet vents 3 and 4, so that the air flow is directed slightly up-
wards.
Press the button
, AUTO appears in the display.
–
AUTO
The automatic mode is switched off by pressing the button for the air distribution
or increasing or decreasing the blower speed. The temperature is nevertheless
regulated.
is located in the bottom part of the device. Do
Defrosting windshield
Defrosting windshield - switching on
⇒ f ig.
–
Press the button
Defrosting windshield - switching off
–
Once again press the button
The temperature control is controlled automatically. More air flows out of the air
outlet vents 1 and 2.
Setting temperature
–
You can set the desired interior temperature after switching on the ignition
with the control dial
1
.
You can set the interior temperature between +18 ℃ (64 °F) and +29 ℃ (86 °F).
The interior temperature is regulated automatically within this range. If you select
the temperature below +18 ℃ (86 °F), "LO" appears in the display. If you select the
temperature higher than +29 ℃ (86 °F), "HI" appears in the display. In both limit
positions the Climatronic operates at maximum cooling or heating capacity, re-
spectively. The temperature is not controlled in this case.
Lengthy and uneven distribution of the air flow out of the vents (in particular at
the leg area) and large differences in temperature, for example when getting out
of the vehicle, can result in chills in sensitive persons.
Controlling blower
There are a total of seven blower stages available.
The Climatronic system controls the blower stages automatically in line with the
interior temperature. You can also, however, adapt the blower stages manually to
suit your particular needs.
⇒ f ig. 76
–
Turn the control dial
10
crease blower speed).
If you switch off the blower, the Climatronic is switched off.
76.
or the button
.
AUTO
to the left (reduce blower speed) or right (in-
£
Advertisement
Table of Contents
