70
Heating and air conditioning system
Air outlet vents
The information provided is valid for all vehicles.
Fig. 73 Air outlet vents
Open the air outlet vents 3 and 4
Turn the vertical thumbwheel (air outlet vents 3) or the horizontal wheel (air
–
outlet vents 4) to the position .
Close air outlet vents 3 and 4
Turn the vertical thumbwheel (air outlet vents 3) or the horizontal wheel (air
–
outlet vents 4) to the position 0.
Change air flow of air outlet vents 3 and 4
–
In order to change the strength of the air flow, swivel the horizontal lamellas
with the aid of the moveable adjuster.
–
In order to change the lateral direction of the air flow, turn the vertical lamel-
las with the aid of the moveable adjuster.
You can set the air supply to the individual vents with the air distribution control
⇒ f ig.
C
74. Air outlet vents 3 and 4 can also be opened or closed individually.
Warmed, unwarmed or cooled air will flow out of the air outlet vents according to
the setting of the regulator of the heating or the air conditioning system and the
atmospheric conditions.
Heating
Using the system
The heating system delivers air into the interior of the vehicle and
warms it as required.
Setting temperature
⇒ f ig. 74
Turn the control dial
–
A
ture.
Turn the control dial
to the left in order to increase the temperature.
–
A
Controlling blower
–
Turn the blower switch
B
into one of the positions, 1 to 4, in order to switch
the blower on.
–
Turn the blower switch
B
into position 0 in order to switch the blower off.
–
If you wish to shut off the fresh air supply, use the button
mode ⇒ p age 71.
Control for air distribution
You can adjust the direction of the inlet air flow ⇒ p age 70 using air distribu-
–
tion regulator
C
.
Rear window heater
. Further information ⇒ p age 45, Rear window heater.
–
Press button
2
All controls apart from the control dial
position.
Fig. 74 Heating: Control elements
to the right in order to increase the tempera-
1
- recirculated air
B
can be set to any desired intermediate
£