Outside Temperature - Skoda Yeti Owner's Manual

Switching over the memory with the help of the button
screen wiper lever or with the help of the button
wheel ⇒ p age 15.
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the igni-
tion is switched on until it is switched off. New data will also flow into the calcula-
tion of the current driving information if the trip is continued within 2 hours after
switching off the ignition. If the trip is interrupted for more than 2 hours, the
memory is automatically erased.
Total-trip memory (memory 2)
The total distance driven memory gathers data from any number of individual
journeys up to a total of 19 hours and 59 minutes driving or 1 999 kilometres driv-
en. 99 hours and 59 minutes driving time or 9 999 km driven in vehicles with an
Information display. The memory is deleted when either of these limits is reached
and the calculation starts from anew.
The total-trip memory will not, contrary to the single-trip memory, be deleted af-
ter a period of interruption of driving of 2 hours.
Note
All information in the memory 1 and 2 is erased if the battery of the vehicle is dis-
connected.
Operating with the buttons on the windshield wiper lever and on
the multifunction steering wheel
Fig. 6 Multi-functional indicator: Controls on the windshield wiper lever/controls on the mul-
tifunction steering wheel
Using the system Safety
⇒ f ig. 6
on the wind-
B
D on the multifunction steering

Driving Tips
⇒ f ig. 6
The rocker switch and the button
A
wiper lever. Switching over and resetting is performed with the handwheel
the multifunction steering wheel.
Selecting the memory
After briefly pressing the button
–
pressing the button D on the multifunction steering wheel, you can select the
desired memory.
Selecting the functions with the help of the windshield wiper lever
Press the top or bottom rocker switch
–
way, call up in sequence the individual functions of the multi-functional indica-
tor.
Selecting the functions with the help of the multifunction steering wheel
By pressing the button , you can call up the menu of the multi-functional in-
– C
dicator.
– Turn the handwheel D upwards or downwards. In this way, call up in se-
quence the individual functions of the multi-functional indicator.
Setting function to zero
Select the memory you want.
–
– Press the button B or D for more than 1 second.
The following readouts of the selected memory will be set to zero with the button
on the windshield wiper lever or with the button
B
ing wheel:
● average fuel consumption,
● distance driven,
● average speed,
● Driving time.
You can only operate the multi-functional indicator when the ignition is switched
on. After the ignition is switched on, the function displayed is the one which you
last selected before switching off the ignition.

Outside temperature

The outside temperature appears in the display when the ignition is switched on.
General Maintenance Breakdown assistance
Instruments and warning lights
are located on the windshield
B
on the windshield wiper lever or by briefly
B
for longer than 0.5 seconds. In this
A
on the multifunction steer-
D
Technical data
15
D on

£