Table of Contents
Advertisement
If a voice command is not detected, the system answers with "Sorry?" and a new
entry can be performed. After the 2nd error the system repeats the aid. After the
3rd error the answer "Procedure cancelled" is given and the dialogue is ended.
Switch on voice control (dialogue)
You can start the dialogue at any time:
● by briefly pressing the
button on the adapter
● by pressing the button
longer on the multi-function steering wheel
⇒ f ig.
90;
Switching off voice control (dialogue)
If the system is currently playing a message, you will need to stop the message
currently being played:
● by pressing the button
briefly on the adapter;
● by pressing the button
longer on the multi-function steering wheel.
If the system expects a voice command, you can end the dialogue yourself:
● Do some with the CANCEL voice command;
● by pressing the button
briefly on the adapter;
● by pressing the button
longer on the multi-function steering wheel.
Note
The dialogue of an incoming call is immediately interrupted.
Voice commands
Basic voice commands for operating the telephone control unit
Voice command
After this command the system repeats all possible
HELP
commands.
With this command you call up the contact from the
CALL XYZ
phone book ⇒ p age 99.
After this command, for example the phone book can
PHONE BOOK
be repeated, a voice entry for the contact can be up-
dated or deleted etc.
CALL HISTORY
Lists of dialled numbers, missed calls, etc.
Using the system
Safety
⇒ f ig.
89;
Action
Driving Tips
General Maintenance
Voice command
After this command a phone number can be entered
DIAL NUMBER
which establishes a connection to the requested par-
ty.
After this command the system selects the last se-
REDIAL
lected telephone number.
Play music from the mobile phone or another paired
a)
MUSIC
device.
After this command the system offers additional con-
FURTHER OPTIONS
text-dependent commands.
SETTINGS
Selection for setting Bluetooth
CANCEL
The dialogue is ended.
a)
On vehicles fitted with the radio navigation system Amundsen+, this function can be accessed via
the menu of the radio navigation system; see the operating instructions for the Amundsen+.
After giving the command DIAL NUMBER, the system requests the entry of a tele-
phone number. The telephone number can be entered as an interconnected spo-
ken row of digits (complete number), in the form of order of digits (separation
through a brief voice pause) or through individually spoken digits. After each order
of digits (separation through brief voice pause) all of the digits detected up to now
are repeated by the system.
The digits 0 - 9, symbols +, , # are permitted. The system detects no continuous
digit combinations such as twenty-three, but only individually spoken digits (two,
three).
Call name
Switch on the voice operation ⇒ p age 99, Switch on voice control (dialogue).
–
–
Give the command CALL XYZ after the signal tone.
Example for calling the name from the phone book
Voice command
CALL XYZ
e.g. WORK
Breakdown assis-
tance
Communication
Action
®
, dialogue etc.
Announcement
"Say home, work, mobile"
"XYZ work is dialled."
Praktik
Technical data
99
£
Advertisement
Table of Contents
