Variable Loading Floor In The Luggage Compartment - Skoda Roomster 2011 Owner's Manual

58 Seats and Stowage
Static separation net
Fig. 48 Use of the static separation net behind the rear seats/behind the front seats
Install the static separation net behind the front seats or the rear seats.
Install the static separation net behind the rear seats
– Remove the luggage compartment cover.
– Take the separation net out of the bag.
Unfold both parts of the cross rod until they are heard to engage.
–
Insert the cross rod into the mount
–
rod forward. In the same way, fix the cross rod to the other side of the vehicle,
⇒ f ig.
mount B 48.
– Hang the carabines C at the ends of the strap into the lashing eyes behind
the rear seats.
– Pull the strap through the tensioning clasp, first of all on the one side and
then on the other side.
Remove the static separation net behind the rear seats
– Slacken the bands on both sides and take off the carabines
Push the cross rod first of all on the one side and then on the other side to-
–
wards the rear.
Take the cross rod out of the mounts
–
Pack static separation net
– Press the red button of the joint
Put the separation net folded together in the bag and close it.
–
first on the one side and push the cross
B
⇒ f ig.
C 48.
.
B
A - so that it releases.
Attach the bag with the aid of the plastic carabines to the eyes on the left and
–
right luggage compartment trim panel.
Installing and removing the static separation net behind the front seats
on the right is carried out analogously as behind the rear seats. Use the eyes be-
hind the front seats to attach the carabines. Remove the rear seats to enlarge the
luggage compartment.
Installing and removing the static separation net behind the rear seats with varia-
ble loading floor ⇒ p age 58 is carried out analogously as behind the rear seats
without variable loading floor. Use the lower eyes at the fixing wedges on the
front part of the variable loading floor in order to attach the carabines.

Variable loading floor in the luggage compartment

Remove variable loading floor
Fig. 49 Luggage compartment: Fold up variable loading floor/remove
The variable loading floor makes it easier to handle bulky luggage and creates an
even luggage compartment floor when the rear seats are folded forward. The
maximum permissible surface load of the variable loading floor is 75 kg.
Removing the variable loading floor
⇒ f ig. 49
– Unhook the loops A of the elastic partition out of the fixing points.
– Unlock the variable loading floor by turning the locking bolts
⇒ f ig.
180° to the left 49.
– You can fold together the variable loading floor by moving it in the direction of
the arrow.
⇒ f ig. 48

B by approx.
£