How Are Seat Belts Correctly Fastened - Skoda Roomster 2011 Owner's Manual

Hide thumbs Also See for Roomster 2011:
Table of Contents

Advertisement

How are seat belts correctly fastened?

Fastening three-point seat belts
Fasten your seat belt before starting!
Fig. 94 Routing of belt webbing over the shoulders and the lap belt/Routing of belt webbing
for an expectant mother
Correctly adjust the seat and the head restraint before fastening your seat
belt ⇒  p age 102, Correct seated position.
Slowly pull the belt webbing at the tongue of the lock over your chest and pel-
vis ⇒ 
.
Insert the tongue of the lock into the seat belt buckle belonging to the seat
until it is heard to lock in place.
Pull on the seat belt to check that it has also reliably engaged in the lock.
Each three-point seat belt is equipped with an inertia reel. This inertia reel offers
you complete freedom of movement if the belt is unreeled slowly. If the brakes
are applied suddenly, the inertia reel will block. The belts also block when the car
accelerates, when driving downhill and when cornering.
Expectant mothers must also wear the seat belt ⇒ 
Using the system
Safety
.
Driving Tips
General Maintenance
WARNING
● The shoulder part of the seat belt must never run across your neck but
must run approximately over the middle of the shoulder and fit snugly against
the chest. The lap part of the belt must run across the hip and must never be
routed across the stomach. It must always fit snugly
belt webbing as required.
● The lap part of the belt should be positioned as low as possible at the pel-
vis of an expectant mother in order to avoid exerting any pressure on the low-
⇒  f ig. 94
er abdomen
- right.
● Always ensure that the webbing of the seat belts is properly routed. Seat
belts which are not correctly adjusted can themselves cause injuries even in
minor accidents.
● A seat belt which is hanging too loose can result in injuries as your body is
moved forward by the kinetic energy produced in an accident and is then sud-
denly held firm by the belt.
● Only insert the lock tongue into the lock which is the correct one for your
seat. This will affect the protection which the belt offers and increase the risk
of an injury.
Seat belt height adjuster on the front seats
The seat belt height adjuster makes it possible for you to adapt the routing of the
front three-point seat belt in the area of the shoulder to match your body size.
To adjust the belt height press the height adjuster and move it up or down
⇒  f ig.
95.
Then pull firmly on the belt to ensure that the seat belt height adjuster has
correctly locked in place.
Breakdown assis-
tance
Seat belts
⇒  f ig. 94
- left. Adjust the
Fig. 95 Front seat: Seat belt height ad-
juster
Praktik
Technical data
107
£

Advertisement

Table of Contents
loading

This manual is also suitable for:

Roomster

Table of Contents