Table of Contents
Advertisement
16
Instruments and warning lights
Average fuel consumption
The average fuel consumption since the memory was last erased is shown in the
display in litres/100 km ⇒ p age 14. This information can help you to adapt your
style of driving to the fuel consumption you wish to achieve.
If you wish to determine the average fuel consumption over a certain period of
time, you must erase the memory at the start of the new measurement using the
button
on the windshield wiper lever
B
the first approx. 300 m you drive after erasing the memory.
The indicated value will be updated every 5 seconds while you are driving.
Note
The amount of fuel consumed will not be indicated.
Range
The estimated range in kilometres is shown on the display. It indicates the dis-
tance you can still drive with your vehicle based on the present level of fuel in the
tank for the same style of driving.
The readout is shown in steps of 10 km. After lighting up of the indicator light for
the fuel reserve the display is shown in steps of 5 km.
The fuel consumption for the last 50 km is taken as a basis for calculating the
range. If you drive in a more economical manner from this moment on, the range
will be increased accordingly.
If the memory is set to zero (after disconnecting the battery), the fuel consump-
tion of 10 ltr./100 km is calculated for the range; afterwards the value is adapted
accordingly to the style of driving.
Distance driven
The distance driven since the memory was last erased appears in the display
⇒ p age 14. If you wish to calculate the distance driven as of a particular time, you
must erase the memory at this moment in time by pressing the button
⇒ f ig.
windshield wiper lever
6.
The maximum distance indicated in both memories is 1 999 km or on vehicles with
information display, it is 9 999 km. The indicator is set back to null if this period is
exceeded.
⇒ f ig.
6. A zero appears in the display for
on the
B
Average speed
The average speed since the memory was last erased is shown in the display in
km/hour ⇒ p age 14. If you wish to determine the average speed over a certain pe-
riod of time, you must erase the memory at the start of the new measurement by
pressing the button
on the windshield wiper lever
B
A zero appears in the display for the first 100 m you drive after erasing the memo-
ry.
The indicated value will be updated every 5 seconds while you are driving.
Current speed
The current speed which is identical to the display of the speedometer, is indica-
⇒ f ig.
ted on the display
3
2.
Oil temperature
If the oil temperature is lower than 50 °C or if a fault in the system for checking
the oil temperature is present, three lines are displayed instead of the oil temper-
ature.
Warning against excessive speeds
This function enables you to set a speed limit and will notify you when this speed
limit is exceeded.
Adjust the speed limit while the vehicle is stationary
⇒ f ig.
–
With button
A
6, choose the menu point Warning against excessive
speeds.
–
Press the button
B
to active the ability to set the speed limit (value flashes).
–
Use the button
A
to adjust the required speed limit, e.g. to 50 km/h.
Confirm the speed limit that was set with button
–
until the setting is saved automatically (the value stops flashing).
This allows you to set the speed in 5 km/h intervals.
Adjust the speed limit while the vehicle is moving
–
With switch
A
, choose the menu point Warning against excessive speeds.
⇒ f ig.
6.
, or wait approx. 5 seconds
B
£
Advertisement
Table of Contents
