Table of Contents
Advertisement
Network Camera Settings
C PPP SET Settings
These settings are used in order to connect the camera to the Internet via a modem.
Note: When using modem connections, you cannot access the camera using a computer's web
browser. You should normally connect the camera to a wired LAN or wireless LAN.
1
2
3
4
5
6
7
8
1
Install the Network Archiving software
(sold separately) to the computer.
Refer to the documentation provided with the
Network Archiving software for further details.
2
Set pin 1 of the PC/MODEM select switch
at the rear of the camera to the "MODEM"
setting.
3
Click the [PPP] button in the main menu.
The initial PPP SET window will be displayed.
4
Select "USE" from the [PPP USE]
drop-down list box.
English
5
Type in the telephone number, login ID
and password for the access point to
connect to.
•
PROVIDER TEL. NO.
•
LOGIN ID
•
PASSWORD
6
Type in the commands to use for
controlling the modem.
Type in the commands starting with "AT" that
are specified by the modem manufacturer in
the [MODEM: INITIALIZE COMMAND] box,
and also type in the command to change the
flow control setting to software flow control in
the same box.
Change any other settings as required using
the drop-down list boxes.
7
Once you have finished changing the
settings, click the [SET] button.
– 23 –
Must be entered
Must be entered
Advertisement
Table of Contents
