Installation Of Plug-In Software - Sanyo VCC-WB2000P Instruction Manual

Network Camera Settings

1 Installation of Plug-in Software

Install the plug-in software (on the setup CD-ROM) onto the computer that is to be used. Installing the
plug-in software makes it possible to view live images from network cameras using the computer's web
browser.
1
Turn on the power for the computer.
After Windows has loaded, continue to the
next step.
2
Insert the setup CD-ROM into the
CD-ROM drive of the computer.
3
Click "Start" and then click "Run".
4
Type "D:\Setup.exe".
Type the drive letter for the CD-ROM drive of
the computer in place of "D".
5
Click the [OK] button.
After a short wait, the installation window will
appear.
Note: Simply answer the prompts that
appear on the screen in order to
continue installing the software. The
installation program has been set up
beforehand to install the software
correctly.
English
6
Click the [Next] button.
7
Read the license agreement, and select "I
accept the terms in the license
agreement" if you agree to the terms of
the license. Then click the [Next] button.
– 13 –